Suspensions: Dynatrac Axles

USA made Dynatrac axle assemblies are manufactured using the highest quality processes and raw materials. From materials through to assembly, Dynatrac axles exhibit quality through and through. Dynatrac axles set the benchmark on axle design and performance, and have a wide range of products and variants to suit every need and budget.

Dynatrac has been established for over 20 years and is the industry leader in high performance axle and drivetrain assemblies. All harware is proudly sourced and manufactured in the  USA and all products are backed by the best service and warranty in the business.

Dynatrac offers a wide range of axle configurations from OEM bolt-in equipment to custom, bespoke competition units. Whatever your needs or requirements are, chances are Dynatrac will cater for it.

We stock the following Dynatrac Axles for the Jeep Wrangler which we have compared side by side

Dynatrac JP60-4001-M Complete 60.5 Inch Trail Series 60 Rear Axle For 1997-06 Jeep Wrangler

  • Complete Dynatrac Dana 60 axle assembly with 6 month limited warranty
  • Dynatrac Pro 60 Hi-Pinion housing
  • SD 35 spline, 1.5 inch induction hardened alloy steel axle shafts
  • Dual Sump / High Volume-Oil System
  • Rear disc brake assemblies with parking brake
  • Dual 5 on 4.5 and 5 on 5.5 lug pattern (stock 5 on 4.5)
  • Choice of ring and pinion ratio (3.54:1 – 5.38:1)
  • Stock pinion angle
  • D60 heavy-duty steel differential cover
  • 1310 U-bolt style yoke
  • Width is 60.5 inch
  • Billet housing ends, large tapered roller axle bearings, and heavy duty retainer
  • Dynatrac Hi-strength TJ coil spring bracket package
  • Comes standard with a Detroit locker
  • Assembly is finely detailed with high gloss black finish
  • Click here for more
Dynatrac JP60-3002-E Complete 61.5 Inch Pro 60 Hi-Pinion Front Axle For 1987-95 Jeep Wrangler

  • Complete Dynatrac Dana 60 axle assembly with 12 month limited warranty
  • Axle is set-up for an application with a driver’s side offset pumpkin
  • Dynatrac Pro 60 Hi-Pinion housing
  • SD 35 spline, 1.5 inch induction hardened alloy steel inner axle shafts (uses 1480 axle joint)
  • Upgraded disc brake assembly with a 5 on 5.5 bolt circle (stock uses 5 on 4.5)
  • Choice of ring and pinion ratio
  • Open differential
  • Best pinion angle and wheel alignment for 4-6 inch lifts
  • D60 heavy-duty steel differential cover
  • 1310 U-bolt style yoke (U-bolts included)
  • Dynatrac Pro 60 knuckle, Pro 60 wheel hub, & spindle package
  • High-clearance steering package
  • Width is 61.5 inches (stock is 60.5)
  • High-clearance u-bolt and spring plate kit
  • Assembly is finely detailed with high gloss black finish
  • Click here for more

 

Leave a Reply